INVENTIA KINETICS, S.L.

Imagen

1
Pic legend 1: Automation and Robotics of Tooling. Special Machines. MGSE. SEOSAT Satellite Integration Tool
General information
-
Company nameINVENTIA KINETICS, S.L.
-
AdressAv. Galileo Galilei 2, 28906 Getafe (Madrid)
-
Turnover6.90 million EUR in year 2023
-
Employees80 in year 2023
-
SMEYES
-
Contact Info:
-
Phone+34918707095
-
Emailinfo@inventiakinetics.com
Activity and Skills
INVENTIA KINETICS is a SME specialized on thermo-mechanical engineering with own inside production capabilities and Clean Room ISO 8 for MAIT activities, with more than 20 years of experience and involved in many national and international programs and missions, for Aerospace, Industrial and Defense industries.
INVENTIA KINETICS has its own capabilities in-house to carry out turnkey projects, from conceptual design to execution and commissioning, special machines, and automatic production lines and, of course, their associated tooling.
Contracts for Big Science facilities
[ITER ORGANIZATION - EADS CASA ESPACIO]
Engineering activities for ITER pre-compression ring
(2013 - 2016)
Several projects including definition, manufacturing, testing and handling of large carbon fiber components for ITER Pre-Compression Rings
Relevant R&D projects
[CDTI - PTA] Multidisciplinary future assembly of sustainable aircraft
(MUFASA)
(2022 - 2024)
MUFASA project aims to develop the capabilities of the Spanish industrial fabric aimed at meeting the technological challenges associated with the automation of the assembly of aerostructures, focusing on each of the individual components of the Future Non-Pressurized Rear Fuselage and Empennage (or tail): i) horizontal stabilizer (HTP), ii) rear fuselage (section S6) and iii) tail cone (section S6.1); as well as the final integration of the three components so that they form a single component, increasing their level of integration and production rate, and reducing cost and energy consumption by eliminating assembly operations and templates.
MUFASA also contributes to achieving sustainable aviation by analyzing new assembly concepts for the future zero-emission hydrogen-powered aircraft.
[CDTI - PTA] Conical section shell for fuselage with cocured frames, stringers and beams
(CUVICO)
(2021 - 2024)
CUVICO project proposes a qualitative technological leap that enables the manufacture of complex and integrated fuselage structures for very high-speed commercial aircraft using composite materials (carbon fiber), so an optimized and multidisciplinary design of structures can be carried out to form part of a new, ultra-efficient advanced fuselage, contributing to the development of the zero-emissions aircraft.
[CDTI - MISIONES] Optimization of automated, multifunctional and sustainable industrial technologies
(OPTIMUS)
(2021 - 2024)
OPTIMUS project aims to promote the mission “Boosting Spanish industry in the industrial revolution of the 21st century”, pursuing the development of disruptive technologies for the industry aimed at its transformation and digitalization that generate greater competitiveness, greater resource efficiency and are supported by digital transformation and connectivity. OPTIMUS addresses the development of flexible automated manufacturing processes (multi-operational), for processing multi-material/multifunctional parts and with embedded sensors; the hybridization between the physical and digital environment; collaborative environments between person-robot, robot-robot, person-machine/production systems, with modeling, simulation and advanced programming of collaborative scenarios; and technologies for eco-design and sustainable, safe and efficient industrial production in all links of the chain.