ELYTT ENERGY, S.L.
Logo ELYTT
Imagen
Quadrupole Magnets
1
Imagen
Toroidal Field Coils for ITER F4E
2
Pic legend 1: Quadrupole Magnets
Pic legend 2: Toroidal Field Coils for ITER F4E

General information

  • Company name
    ELYTT ENERGY, S.L.
  • Address
    Calle Orense 11, 2º B
  • Turnover
    6.00 million EUR in year 2023
  • Employees
    65 in year 2023
  • SME
    YES
  • Contact Info:
    • Phone
      +34914110963
    • Email
      postmaster@elytt.com

Activity and Skills

Elytt Energy is an innovative Spanish company working in high technology projects, solving the needs of our clients in the field of the energy, fusion and particle accelerators. We currently have projects in Germany, USA, France, Italy and Switzerland.

Elytt designs and manufactures fusion reactor structural systems, superconducting magnets for material characterization and TF and PF coils.

Elytt designs and manufacture resistive and superconducting electromagnets for particle accelerators of all types current regulated power supplies with high stability, low noise and reliability used in accelerators and research laboratories. The company provides a complete electromagnetic engineering, design, manufacture and test service.

The company also designs standard and custom-built resistive magnets, reaching from small correctors to very large magnets. 2D and 3D is used for magnetic field modelling.

Our workshop has all manufacturing facilities necessary, winding machines, vacuum system, oven, inert gas oven and all measurement equipment including magnetic measurement.

Elytt Energy offers complete magnet systems including vacuum chambers, supporting stands and matching power supplies.

We specialize in Dipole magnets, Quadrupole magnets, Multipole magnets, Spectrometer systems, Kickers, Septums and Bumper magnets, Scanning magnets.

Also, the following related services are available: FEM Mechanical – Electromagnetic calculation, Beam optical calculations, Vacuum calculation and design, Cryogenics calculation and diseign, On-site Installation.

Contracts for Big Science facilities

[Lawrence Berkeley National Laboratory (LBNL)] Manufacture of 108 dipoles for Advanced Light Source (ALS) (2024)
Types A, B, and C, with CoFe pole pieces
[Lawrence Berkeley National Laboratory (LBNL)] Manufacture of 52 sextupoles for Advanced Light Source (ALS) (2024)
Laminated SHA type sextupoles and SHBSHA type sextupoles, of CoFe laminations
[PPPL ] Manufacture of one TF bundle and OH solenoid for National Spherical Torus Experiment at Princeton Plasma Physics Laboratory (2022)
The TF coil consists of 36 conductors. Elytt first assembles four quadrants of nine conductors each. The conductors are wrapped in fiberglass tape and bind the quadrant together using a process called vacuum pressure impregnation. Each quadrant is placed in a mold inside a vacuum chamber, filled with a resin and baked at a high temperature until it creates one unit. After the four quadrants are completed, the process is repeated to assemble all four quadrants into one circular magnet. Elytt has been perfecting this process at each step by creating models of the quadrants and the assembled coil and then dissecting them to ensure that the resin has permeated each area of the magnet.
[ALS-U ] Manufacture of 130 normal conducting quadrupoles and sextupoles for ALS-U project at Berkeley (2021 - 2023)
There are five families: three quadrupoles and two of sextupoles, the yokes of the quadrupoles are manufactured of solid steel and the sextupoles from laminations.
[FAIR] Supply of 21 Superferric dipole magnets for the Super Fragment Separator (2019)
Design and construction of 3 dipole magnets type 2 and 18 dipole magnets type 3, including one subframe per dipole.
[CBETA ] Design and Manufacture of 132 magnets for the Energy Recovery Linear Accelerator CBETA Project CORNELL UNIVERSITY at USA (2017 - 2019)
Elytt was awarded by Cornell University the calculation, manufacturing engineering, manufacturing, FAT and delivery of 36 dipoles (two different types), 64 quadrupoles (two different types) and 32 correctors (two different types)
[SARAF ] Design and Manufacture of 16 superconducting solenoid packages for CEA SARAF project & supply of 8 superconducting solenoids (2017 - 2022)
Out of the 20 Superconducting Solenoid packages of the SARAF (Soreq Applied Research Accelarator Facility) Superconducting Linac (SCL). Design, validation and manufacturing studies, manufacturing of the SP prototype and series.
[ITER ORGANIZATION] Supply of 400 Outer Vessel Coils (OVCs) (2017 - 2018)
[CERN] Design and Manufacture of the superconductor quadruple magnet (QUACO) for the HL LHC (2016 - 2021)
The QUACO project is a part of the IR magnets in HL-LHC at CERN and has as objective the production of the first two First-of-a-kind HL-LHC two-in-one quadrupoles magnets
[ITER ORGANIZATION] Supply of the handling and impregnation tooling required for the production of the PF coil magnets (2015 - 2021)
The scope was to design, engineering and manufacture the impregnation tooling and additional tooling for ITER poloidal field coil system consisting of six horizontal coils placed outside the toroidal magnet structure. The outer diameters of the PF2-PF5 Coils are between 17 and 25 meters and their weights range between 208 and 384 tons.
[CERN] Design and manufacturing of permanent magnet quadrupoles for the LINAC drift tube for CERN, BRAC and to INFN Legnaro for ESS Lund (2014 - 2018)
ELYTT manufactured the Permanent Magnets Quadrupoles to be used as focusing elements in the drift tube of the Linac, for the following projects, LINAC 4 at CERN, LEHIPA at BARC, Mumbai, European Spallation Source (ESS) at Lund
[CERN] Supply of a Vacuum Impregnation system at CERN (2014 - 2015)
Design, construction, tests, installation and commissioning of a Vacuum Impregnation System, which will be used at CERN to impregnate superconducting coils made of Nb3Sn based conductor with radiation hard resin.
[ITER ORGANIZATION] Ten Windong Packs for ITER Toroidal Field Coils (2010 - 2021)
ELYTT Energy is member of an international consortium; responsible for the manufacture of 10 Winding Packs for the Toroidal field coils. One TF WP is a coil of approx. 9 m wide and 15 m length with an approx. weight of 110 tons. Each WP is obtained stacking 7 Double Pancakes (DP), with each DP is manufactured with a fibre glass and Kapton insulated Cable In Conduit (CICC) Nb3Sn superconductor, inserted in a stainless steel radial plate and ground insulated. Once insulated, the DP is VPIed and then 7 DP are stacked, ground insulated and VPIed.

Relevant R&D projects

No registered projects

Markets

Certifications