ANTEC Magnets S.L.U.
Imagen
1
Pic legend 1: Quadrupole Magnet for the Antiproton Decelerator (AD) - CERN
General information
-
Company nameANTEC Magnets S.L.U.
-
AdressRamón y Cajal, 74 – 48920 Portugalete (Spain)
-
Turnover0.50 million EUR in year 2024
-
Employees3 in year 2024
-
SMEYES
-
Contact Info:
-
Phone+34944724164
-
Emailmagnets@antecsa.com
Activity and Skills
Resistive and permanent magnet design and manufacture, with water or air cooled windings, and high precission laminated or solid magnetic yokes. Main applications so far include particle accelerators, magnetic separation and nanotechnology, among others.
Design and manufacture of superconducting magnets for applications such as particle accelerators, med-tech (protontherapy, MRIs etc.), motors/generators etc.
Cryogenic system design.
All necessary facilities are avaliable at our workshop, including: winding machines, vacuum-pressure impregnating devices, ovens, yoke manufacturing and assembly areas, testing laboratory and a 250 m2 clean working area.
Contracts for Big Science facilities
[CERN]
Design and manufacturing of a Quadrupole magnet for the AD Target Area
(2019 - 2020)
[CERN]
PSB Transfer Line Quadrupole Magnets for the LIU Project
(2019 - 2022)
[CERN]
Coil supply for the Q74 L quadrupole magnets East Experimental Area
(2018 - 2019)
[OTHER]
STFC - UK: Design and manufacture of dipolar magnets for the variable bunch compressor (VBC) in the second phase of the CLARA Project at Daresbury
(2016 - 2017)
[OTHER]
CNAO - Corrector Magnets. 250 Kg. Laminated bonded yokes & water cooled coils
(2015 - 2016)
[OTHER]
PSI - Quadrupoles for the Gantry 3 facility at Paul Scherrer Institute (Switzerland). Water-cooled coils wound from hollow copper wire, stacked magnetic yokes, Ø100 mm aperture. 730 kg
(2014 - 2015)
[CERN]
Combined horizontal/vertical corrector magnets, for the HIE-ISOLDE project. 50Kg. Solid iron yokes and water-cooled coils wound from hollow copper wire. Stringent dimensional tolerances
(2013 - 2014)
[EUROPEAN XFEL]
Combined superconducting magnets (2 dipoles + 1 superferric quadrupole). 103 magnet series
(2012 - 2014)
[ESRF]
Engineering design, manufacture and testing of the quadrupole magnets for the storage ring
(2009 - 2010)
[CERN]
Manufacturing and testing (magnetic and cold) of 1.600 Corrector Sextupole Magnets for the LHC;. rate of 40 units per month
(2000 - 2006)
[CERN]
Manufacturing and testing (magnetic and cold) of 200 Twin Corrector Octupole Magnets for the LHC; rate of 10 units per month
(2000 - 2006)
Relevant R&D projects
[EU - CleanSky2
] -Research and development into new High Temperature Superconductors-based aeronautical electric drives in the frame of a UE-funded project
(HIVOMOT
)
[OTHER
] -Design and manufacture of an electromagnetic system for magnetic alignment of recycled magnetic powder for rare earth permanent magnets manufacture
[OTHER
] -Manufacturing design and fabrication of the active part of a Direct Drive Power solution to be used in a wave energy converter
[CDTI - CENIT
] -Design and manufacture of a Superconducting compact cyclotron for radioisotope production for PET medical applications
[OTHER
] -Design and manufacture of a new concept of a wet basis magnetic separator
[CERN PCP
] -Design of a Superconducting 4m long Quadrupole for Hi-Lumi Project
(QUACO)